Skip to main content
Download PDF

Identification of reliable reference genes for quantitative real-time PCR normalization in pitaya

Plant Methods volume 15, Article number: 70 (2019) Cite this article

Abstract

Background

A suitable reference gene is an important prerequisite for guarantying accurate and reliable results in quantitative real-time PCR (qRT-PCR) analyses. However, there is no absolute universality in reference genes among different species. It’s hard to find an ideal reference gene to fit for different tissues and growth periods. Pitaya (Hylocereus) is commercially produced as a new fruit crop at a large scale in tropical and subtropical regions. To date, there is no report on the identification of the most reliable reference genes for qRT-PCR normalization in pitaya.

Results

In this study, six candidate reference genes i.e. Actin(1), GAPDH, UBC(1), UBC(2) EF1-α(1) and histone(1) were selected from thirty-nine typical candidate reference genes to determine the most stable reference genes for qRT-PCR normalization in different tissues, temperature stresses and fruit developmental stages of pitaya. Among the six candidate reference genes, Actin(1) and EF1-α(1) were the most stable gene according to calculations of three statistical methods (GeNorm, NormFinder and BestKeeper) while UBC(1) and UBC(2) showed the lowest expression stability. The six candidate reference genes were further validated by comparing expression profiles of key genes related to betalain biosynthesis at flesh coloration stages of Guanhuahong (Hylocereus monacanthus) and Guanhuabai (H. undatus) pitayas. Actin(1) was recommended the best reference gene for accurate normalization of qRT-PCR data.

Conclusions

In this study, the stability of the selected reference genes for normalizing the qRT-PCR data were identified from pitaya. Actin(1) was the most stably expressed genes in different tissues and fruit developmental stages in pitaya. The present work provides the first data of reference gene identification for pitaya and will facilitate further studies in molecular biology and gene function on Hylocereus and other closely related species.

Background

Quantitative real-time PCR (qRT-PCR) is a nucleic acid quantitative technology to study gene expression level in molecular biology research [1]. It combines the sensitivity of conventional PCR with a cost-effective assay using a specific fluorescent signal. Compared with northern blot and conventional RT-PCR, qRT-PCR is proven to be highly sensitive and specific and has been increasingly used in various research fields of biological sciences [2,3,4]. A stable reference gene plays an important role in analyzing the relative expression levels of target genes [5]. Reference gene, i.e. internal reference gene, whose expression is relatively constant in various tissues and cells, can be used as the reference in the detection of gene relative expression analyses. However, transcription levels of reference gene may change in different species, treatments and/or developmental stages. Therefore, it is necessary to validate the expression stability of reference genes under various tissues and experimental conditions in different species.

The accuracy of gene expression levels using qRT-PCR depends on the use of stable reference genes to normalize the difference between samples [6]. GAPDH, Actin, 18S rRNA, 28S rRNA, tubulin, EF1-α and ubiquitin are commonly used as reference genes for comparison of samples [7,8,9]. Reference genes are always expressed because they produce proteins that cells must have to function, however, the stability of reference genes is limited in different tissues, growth and development stages of the same or different plants [10,11,12,13,14,15]. Therefore, it is necessary to select the most suitable reference gene for accurate qRT-PCR evaluation according to different species and experimental conditions [16, 17]. In addition, calculations of reference genes by geNorm [6], NormFinder [18] and BestKeeper [19] is essential for normalization of qRT-PCR analyses.

Pitaya or pitahaya, also known as dragon fruit, originated from rainforest in tropical and subtropical areas of Central America and Mexico. Pitaya belongs to the genus Hylocereus in the Cactaceae family. Currently, red-flesh and white-flesh pitayas have been commercially produced as a new fruit crop at a large scale in Central America, Southeast Asia and China. Pitaya is a fast growing, perennial, hemi-epiphytic, vine-like, crassulacean acid metabolism (CAM) plant. It is a spiny succulent plant which can adapt to a wide ecological range such environmental cues as drought, heat and poor soil. Pitaya has gained great attention of the world due to its high nutritional value as well as its antioxidant capacity and antiproliferative activities [20,21,22]. Therefore, the knowledge about the molecular basis of pitaya may contribute to the discovery of new and promising genes related to important agricultural traits that could be further transferred to a target crop for the development of new crop cultivars.

Gene expression analysis is an important tool to elucidate the complex regulatory networks of the genetic, signalling and metabolic pathway mechanisms during plant life cycle. qRT-PCR is an ideal tool to verify the results of differential gene expression of interest on a smaller scale. To study mRNA expression levels, a set of appropriate reference genes are fundamental to get reliable results from qRT-PCR. In this study, thirty-nine genes annotated as 18S rRNA (18S ribosomal RNA), CYP (cytochrome), Actin, GAPDH (glyceraldehyde-3-phosphate dehydrogenase), EF1-α (eukaryotic elongation factor 1-alpha), histone, TUA (alpha-tubulin), TUB (beta-tubulin), UBQ (ubiquitin) and UBC (ubiquitin-conjugating enzyme) were selected as candidate reference genes to evaluate their expression stability in different pitaya tissues, temperature stresses and fruit developmental stages using three available statistical algorithms i.e. geNorm [6], NormFinder [18] and BestKeeper [19]. The aim of the present study is to identify appropriate reference genes for qRT-PCR normalization in pitaya and facilitate future molecular studies in Hylocereus. In addition, we validated the expression levels of the key genes related to betalain biosynthesis using the selected reference genes.

Materials and methods

Plant materials

Two pitaya cultivars i.e. Guanhuahong (H. monacanthus) and Guanhuabai (H. undatus) pitayas from the same orchard of Dalingshan Forest Park were used as plant materials. Guanhuahong pitaya is a red flesh fruit with red peel while Guanhuabai pitaya is a white flesh fruit with red peel (Additional file 1: Fig. S1). Root, stem, receptacle, calyx, petal, filament, anther, ovary, style, stigma, peel and flesh were collected separately and used for expression analyses of candidate reference genes. Pitaya flesh were collected on the 13rd, 16th, 19th, 23rd, 25th, 27th and 29th days after flowering (DAF) in July and August, 2015 (Additional file 1: Fig. S1). Cutting seedlings were collected for expression analyses of candidate reference genes on the 0, 9th, 18th, 36th, 72th and 144th h after cultivating in different temperature stresses (4 °C, 10 °C and 25 °C). All samples were immediately frozen in liquid nitrogen and stored at − 80 °C until use.

Candidate gene selection and primer design

Thirty-nine candidate reference genes with relatively stable expression levels (based on reported RPKM and fold change values) i.e. 18S rRNA, Actin(1), EF1-α(1), EF1-α(2), EF1-α(3), EF1-α(4), EF1-α(5), GAPDH, Actin(2), Actin(3), Actin(4), TUA(1), TUA (2), CYP(1), CYP(2), eIF(1), eIF(2), eIF(3), eIF(4), eIF(5), histone(1), histone(2), histone(3), histone(4), histone(5), TATA(1), TATA(2), TATA(3), UBC(1), UBC(2), UBC(3), UBC(4), UBC(5), UBC(6), TUB(1), TUB(2), UBQ(1), UBQ(2) and UBQ(3) were selected from pitaya transcriptome database (NCBI accessions: SRR2924904) (Additional file 2: Table S1) [23]. The specific primers (Table 1) were designed using Primer Premier 5.0 with the following parameters: melting temperature (Tm) values ranging from 47 to 63 °C, GC percent of 25–65%, primer lengths of 18–22 bp and product length of 100–300 bp. Tenfold serial dilutions of cDNA were used to determine slope of the standard curve to calculate amplification efficiency of primer (E = 10(−1/slope of the standard curve)).

Table 1 Primers used in this study
Full size table

RNA extraction and cDNA synthesis

Total RNA was extracted according to the protocol of Wu et al. [24] and was purified by RNase-free columns (Huayueyang, Beijing, China). Genomic DNA was removed by DNase I (TaKaRa, Dalian, China). RNA quality was analyzed by 1.0% agarose gel and RNA integrity was assessed using an Agilent 2100 Bioanalyzer (Agilent Technologies, Santa Clara, CA, USA). Only RNA samples with an A260/A280 ratio of 1.8–2.2 and an A260/A230 ratio > 1.8 were used for further analysis. cDNA was synthesized from 2.0 µg of total RNA samples using M-MLV first strand cDNA synthesis kit according to the manufacturer’s instructions (TaKaRa).

qRT-PCR analyses

qRT-PCR was conducted with ABI 7500 real-time PCR System (Applied Biosystems, CA, USA) using the SYBR® Premix Ex Taq™ II (TaKaRa). Twenty microliters reaction mixture contained 2 µL of diluted cDNAs (~ 15 ng/μL), 10 µL SYBR Premix Ex Taq II (TaKaRa), 0.4 µL of each primer (10 µM) and 7.2 µL ddH2O. The PCR reaction conditions were as follows: 50 °C for 2 min; 95 °C for 10 min; 40 cycles at 95 °C for 15 s; 56 °C for 30 s; and 72 °C for 40 s. The melting curve was generated by heating the amplicon from 60 to 95 °C to confirm primer specificity. Each PCR reaction was repeated three times with three biological replicates. Relative fold changes in gene expression were calculated using the comparative 2−ΔΔCT method [25].

Analysis of gene expression stability

NormFinder, geNorm and BestKeeper were used to evaluate expression stability of reference genes in various pitaya tissues, temperature stresses and fruit developmental stages. The geNorm program determines stability and the optimal number of genes required to calculate the M value and pairwise variation Vn/Vn + 1 between two sequential normalization factors [6]. The NormFinder program was performed to obtain the best candidate reference genes by the average expression stability between samples based on the results of variance analysis [18]. The BestKeeper program is used for determination of stable reference genes, which calculates pairwise correlations based on standard deviation (SD) and percentage covariance (Cov) values [19].

Validation of reference genes

To validate the reliability of the selected reference genes, the relative expression levels of a key gene Cytochrome P450 (Cyt P450-like1) involved in betalain biosynthesis were analyzed using qRT-PCR at different flesh coloration stages of Guanhuahong and Guanhuabai pitayas. The specific primers were designed according to Hua et al. [23] (Table 1).

Statistical analyses

Statistical analyses were performed using SPSS 17.0 software.

Results

Selection of candidate reference genes and sequence analyses

Thirty-nine reference genes from the transcriptome of pitaya were selected as putative candidate reference genes (Additional file 2: Table S1). The cDNA fragments of the 39 reference genes ranged from 234 to 5304 bp. Results from BLAST analyses demonstrated that 27 reference genes had maximum identity (80–92%) with similar deduced polypeptides from Chenopodium quinoa, 7 reference genes had maximum identity (93 to 99%) with similar deduced polypeptides from H. monacanthus, and the rest are similar to the other plants (Additional file 3: Table S2). For example, Actin(1) had 98% sequence identity with Hpactin7 (MF356257.1), eIF(1) shared 86% sequence identity with CqeIF6-2 (XM_021866570.1) and histone(3) showed 92% sequence identity with Sghistone (KC415067.1) (Additional file 3: Table S2).

Verification of primer specificity and stability

Melting curve plays an important role in assessing the effects of primer specificity. As shown in Additional file 4: Fig. S2, there were only one distinctive peak for Actin(1), EF1-α(1), EF1-α(2), EF1-α(3), EF1-α(5), GAPDH, Actin(3), TUA(1), TUA(2), CYP(1), CYP(2), eIF(1), eIF(2), eIF(3), eIF(4), eIF(5), histone(1), histone(3), histone(4), histone(5), TATA(1), TATA(2), TATA(3), UBQ (1), UBQ (2), UBQ (3), UBC(1), UBC(2), UBC(3), UBC(4), UBC(5), UBC(6), TUB(1) and TUB(2). Therefore, those thirty-four candidate reference genes were selected from the thirty-nine candidate reference genes according to the melting curves (Additional file 4: Fig. S2). The efficiency for each primer pair varied from 90.1% for 18S rRNA to 110.4% for EF1-α(5) (Table 1). The sequence length ranged from 102 to 300 bp (Table 1). Cycle threshold (Ct) values ranged from 17.45 for GAPDH to 37 for histone(2). The boxplot provided expression levels of the 39 candidate reference genes (Additional file 5: Fig. S3). A lower Ct value indicated a higher gene expression levels. Across all samples, the maximum Ct values of Actin(1), EF1-α(1), UBC(1), UBC(2), GAPDH and histone(1) were < 23. GAPDH expression levels were the most variable with 5.4 Ct, while Actin(1) showed the least variable levels with 1.5 Ct. Based on the melting curve and Ct values (Additional file 4: Fig. S2 and Additional file 5: S3), six genes i.e. Actin(1), EF1-α(1), GAPDH, UBC(1), UBC(2) and histone(1) were selected as candidate reference genes for further analyses.

Ct value analyses of six reference genes

Ct values of Actin(1), EF1-α(1), GAPDH, UBC(1), UBC(2) and histone(1) were calculated to determine their transcript levels in different tissues, temperature stresses, fruit developmental stages of Guanhuahong and Guanhuabai pitayas. As shown in Fig. 1, a relatively wide range of transcript levels for the six reference genes were detected in different tissues, temperature stresses, fruit developmental stages of the two different color-fleshed pitaya cultivars. In different fruit developmental stages, Ct values of Guanhuabai and Guanhuahong pitayas ranged from 17.28 to 31.74 and 17.18 to 24.94, respectively. Average Ct values were 21.82 for Actin(1), 21.18 for EF1-α(1), 20.25 for GAPDH, 20.66 for UBC(1), 20.96 for UBC(2) and 21.52 for histone(1), respectively (Fig. 1). The lowest Ct value was 17.28 for GAPDH and the highest Ct value was 31.74 for UBC(1) in different fruit developmental stages of Guanhuabai pitaya. As for different fruit developmental stages of Guanhuahong pitaya, the lowest Ct value was 17.18 for UBC(2) and the highest Ct value was 24.94 for histone(1).

Fig. 1
figure 1

Ct values of six candidate reference genes in different fruit developmental stages and tissues of pitayas. Data represent the average values from three biological replicates (± SD)

Full size image

Ct values ranged from 15.76 to 25.29 and 14.53 to 24.82 in different tissues of Guanhuabai and Guanhuahong pitayas, respectively. Average Ct values were 20.70 for Actin(1), 20.06 for EF1-α(1), 19.75 for GAPDH, 20.98 for UBC(1), 19.23 for UBC(2) and 20.59 for histone(1), respectively (Fig. 1). The lowest Ct value was 15.76 for GAPDH gene and the highest Ct value was 25.29 for UBC(2) in different tissues of Guanhuabai pitaya. The lowest Ct value was 14.53 for UBC(2) gene and the highest Ct value was 24.82 for histone(1) gene in different tissues of Guanhuahong pitaya.

In different temperature stresses, the lowest Ct value was 15.92 for GAPDH and the highest Ct value was 23.74 for histone(1). Ct values ranged from 20.81 to 22.84 for Actin(1), 17.79 to 19.78 for EF1-α(1), 15.92 to 19.82 for GAPDH, 19.50 to 21.35 for UBC(1), 18.13 to 19.69 for UBC(2) and 19.53 to 23.74 for histone(1), respectively (Additional file 6: Fig. S4).

The coefficient of variance (CV) of Ct values can determine reference gene stability levels. UBC(2) presented a high degree of transcript level variation with a CV value of 15.61% while Actin(1) presented the lowest degree of variation with a CV value of 4.96% (Additional file 7: Table S3). Among the six candidate reference genes, Actin(1) (4.96%) was the most stable gene while UBC(1) (13.16%) and UBC(2) (15.61%) showed the lowest expression stability according to CV value analyses of six reference genes.

GeNorm analysis

GeNorm was used to select the most stable reference gene by calculating the gene expression stability measure (M) based on the average pairwise expression ratio. The gene with the lowest M value is considered the most stable. A gene with M value below 1.5 can be considered as a reference gene. As shown in Fig. 2, the M values of Actin(1), EF1-α(1), GAPDH, UBC(1), UBC(2) and histone(1) were lower than 1.5, suggesting that all of them conformed to basic requirements for the reference gene. Among the six genes, UBC(2) was the least stable reference gene with the highest M value (> 0.214) detected in the two different colored pitayas, different tissues and fruit developmental stages of Guanhuahong and Guanhuabai pitayas. EF1-α(1) and Actin(1) were the most stable genes with the lowest M value (< 0.058) in different tissues and fruit developmental stages of Guanhuabai pitayas. As for different development stages of Guanhuahong pitaya, the most stable genes were UBC(1) (M = 0.041) and UBC(2) (M = 0.041), followed by histone(1) (M = 0.078). UBC(1) (M = 0.053) and EF1-α(1) (M = 0.053) showed the highest levels of expression stability for different tissues of Guanhuahong pitaya. In different temperature stresses, the most stable genes were Actin(1) (M = 0.040) and UBC(1) (M = 0.040). Actin(1) (M = 0.119) and EF1-α(1) (M = 0.119) are the most stable reference gene suitable for transcript normalization in all tissues/fruits between the two cultivars. Concerning all samples of tested, Actin(1) was the best reference gene for qRT-PCR normalization.

Fig. 2
figure 2

Average expression stability values (M) of the six candidate reference genes using geNorm algorithm. Total represents a comparison between all tissues/fruits between the two cultivars

Full size image

A single reference gene often can not meet the requirements of accurate quantification for transcription analyses of gene expression. It is necessary to use two or more than two reference genes to produce accurate and reliable normalization. The optimal number of reference genes can be determined using the pairwise variation value (Vn/Vn + 1, V-value) as normalization factor for reference genes. Additional (n + 1) reference genes are necessary to normalize the genes if V-value is higher than the threshold of 0.15. As shown in Fig. 3, the pairwise variation values of reference genes were examined when all samples were considered. The ratio of V2/V3 was lower than the threshold of 0.15, suggesting that the optimum number of reference gene was two. There is no need to add a third reference gene as an internal control for the normalization of gene expression in pitaya. Therefore, a combination of Actin(1) and EF1-α(1) was the optimum reference genes for qRT-PCR normalization of various samples in pitaya.

Fig. 3
figure 3

Pairwise variation (V) analyses of the six candidate reference genes using geNorm algorithm. Total represents a comparison between all tissues/fruits between the two cultivars

Full size image

NormFinder analysis

Different from geNorm, the NormFinder can determinate optimal number of reference genes for normalization by intra- and inter- group variations. Average gene expression stability values of the six reference genes in different samples were calculated by NormFinder software and ranking was made based on relative stability values. As shown in Fig. 4, UBC(1) was the least stable reference gene in the total dataset, which is different from the result obtained by NormFinder. In different fruit developmental stages, GAPDH and histone(1) emerged as the most stably expressed gene for Guanhuabai pitaya compared with UBC(1) and GAPDH for Guanhuahong pitayas. In various tissues of Guanhuabai and Guanhuahong pitayas, EF1-α(1) was the most stable reference gene. UBC(1) and Actin(1) were the best reference gene for different temperature stresses. Combined with expression analyses of all samples, histone(1) and GAPDH were the most stable reference genes for normalization in pitaya.

Fig. 4
figure 4

Expression stability values and ranking of the six candidate reference genes using NormFinder algorithm. Total represents a comparison between all tissues/fruits between the two cultivars

Full size image

BestKeeper analysis

BestKeeper program was used to grade candidate reference gene stability by calculating SD of the Ct values, CV and pair correlation coefficient. A gene with SD value below 1.0 can be considered as stable expression. In different temperature stresses, SD values were 0.38 for UBC(2), 0.42 for UBC(1), 0.44 for EF1-α(1), 0.47 for Actin(1), 0.59 for GAPDH and 1.08 for histone(1), respectively. As for the different fruit developmental stages of Guanhuahong pitaya, SD values of Actin(1) and EF1-α(1) were 0.76 and 0.97, respectively, suggesting Actin(1) and EF1-α(1) could be used as reference genes. Actin(1) was the most stably expressed gene, followed by EF1-α(1) (Fig. 5). Compared with Guanhuabai pitaya, Actin(1) was the most stable gene for normalization of the different fruit developmental stages of Guanhuahong pitaya. In different tissues of Guanhuabai and Guanhuahong pitayas, EF1-α(1) (0.97) and Actin(1) (0.9) was the most stable gene, respectively; UBC(2) (2.58) was the least stable reference gene with the highest SD value. In the different colored pitayas, Actin(1) (0.97) was considered to be the most stable gene. Taking into account the total dataset, Actin(1) was the most stable gene in all samples tested. The results of BestKeeper were consistent with the analyses of geNorm.

Fig. 5
figure 5

Expression stability values and ranking of the six candidate reference genes using BestKeeper algorithm. Total represents a comparison between all tissues/fruits between the two cultivars

Full size image

Reference genes validation

To validate the suitability of the two selected reference genes (Actin(1) and EF1-α(1)), and the least suitably ranked candidates UBC(2) according to BestKeeper and geNorm analyses. Relative expression levels of a key gene Cyt P450-like1 involved in betalain biosynthesis were evaluated using qRT-PCR at different flesh coloration stages of Guanhuahong (H. polyrhizus) and Guanhuabai (H. undatus) pitayas (Fig. 6). The expression levels of Cyt P450-like1 increased gradually during flesh color transition from white (23 days) to red stages (25 days) and decreased at full maturation stage (29 days) when single or a combination of reference genes (Actin(1) and EF1-α(1)) were used for normalization. These results were in accordance with betalain accumulation pattern and expression characteristics of Cyt P450-like1 gene related to betalain biosynthesis at all flesh coloration stages of H. monacanthus [23, 26]. However, the expression pattern of Cyt P450-like1 normalized by UBC(2) increased gradually at all flesh coloration stages of Guanhuahong pitaya. Furthermore, when UBC(2) was used to normalize Cyt P450-like1 expression in Guanhuabai pitaya, the expression values of 23 days were overestimated. In general, the RT-qPCR profiling of Cyt P450-like1 gene expression supported the analyses of BestKeeper and geNorm .

Fig. 6
figure 6

Relative expression of cyt P450-like1 in Guanhuahong and Guanhuabai pitayas. Actin(1), EF1-α(1) and Actin(1) + EF1-α(1) were used as one or two most stable reference genes, UBC(2) was used as the least stable reference gene. Different letters indicate significant difference of the expression of the target gene based on three biological replications (P < 0.05, t test; n = 3)

Full size image

Discussion

qRT-PCR is the most sensitive technology of measuring gene transcript levels depending on stable reference gene(s) for normalization [27]. An appropriate reference gene can effectively correct the errors of RNA quantity, reverse transcription efficiency, stability of different reaction channels of PCR instrument and standard operation mode, which can help to obtain the real differential expression of the target genes [28]. The reference genes such as Actin, 18S rRNA and GAPDH are commonly used as reference genes. However, these reference genes show instability in various plant species or genotypes [13, 14, 29]. Their expression levels are different in different patterns of cells and tissues, physiological status and growth periods [30, 31]. Therefore, it is essential to select the most suitable reference gene for the specific sample types and experimental conditions. Pitaya has become a popular fruit due to its excellent nutritional, commercial and medical values [20,21,22]. To date, there is no report on the identification of the most suitable reference gene in pitaya. In this study, 39 typical reference genes from pitaya transcriptome database [23] were selected to determine the most stable reference gene for qRT-PCR normalization in pitaya. Based on the melting curve and Ct values of reference genes (Additional file 4: Fig. S2 and Additional file 5: S3), six genes, i.e. Actin(1), EF1-α(1), GAPDH, UBC(1), UBC(2) and histone(1) were selected as candidate reference genes for further analyses.

NormFinder [18], geNorm [6] and BestKeeper [19] were commonly used to evaluate the stability of the reference genes. The geNorm was applied to estimate the stability of a candidate gene by pairwise comparison, while the NormFinder and BestKeeper were used to prevent co-regulation and to further assess the results obtained by the geNorm program. In the present study, geNorm, NormFinder and BestKeeper were applied to define the stability of Actin(1), EF1-α(1), GAPDH, UBC(1), UBC(2) and histone(1) reference genes in different tissues, temperature stresses and fruit developmental stages of pitaya. Different rankings for the six candidate reference genes were detected after comparison to the ranking of the candidates generated by the three algorithms (Fig. 2, 3, 4, 5). From the geNorm evaluation, we found that Actin(1) and EF1-α(1) were the optimum reference genes for qRT-PCR normalization of various samples of pitaya. The results of BestKeeper were consistent with the analyses of geNorm, showed that Actin(1) was the most stable reference gene in all of the samples examined. However, results from NormFinder analyses showed that histone(1) and GAPDH were the most stable reference genes in all of the samples tested. The reason for the differences in the top-ranked reference genes may be due to the discrepancies resulted from different approaches of calculations by geNorm, NormFinder and BestKeeper programs. Similar results were also obtained in Vitis vinifera [32], Citrus [33], Euscaphis konishii [34], Cowpea [35] and Actinidia deliciosa [36]. It has been reported that the most discrepant results in gene stability ranking were obtained by BestKeeper [37]. In our study, although there are some differences in the stability of each reference gene expression of samples from the three different algorithms, Actin(1) and EF1-α(1) are the optimum reference genes. Combining the three algorithms with expression analyses, we suggested Actin(1) was the most adequate reference gene for expression studies in different tissues, temperature stresses and fruit developmental stages of pitaya.

Cytochrome P450 is a key gene involved in betalain biosynthesis [23, 38,39,40,41,42]. To validate the candidate reference genes, the relative expression levels of Cyt P450-like1 gene were analyzed by qRT-PCR during flesh coloration of Guanhuabai and Guanhuahong pitayas. Expression levels of Cyt P450-like1 increased gradually during flesh coloration and decreased at full maturation stage when single or a combination of reference genes (Actin(1) and EF1-α(1)) were used as reference genes. Those results were in consistent with betalain accumulation pattern and expression characteristics of Cyt P450-like1 at all flesh coloration stages of H. monacanthus. Moreover, the expression pattern of Cyt P450-like1 increased with fruit maturation of H. undatus [23, 24]. Those results suggested that Actin(1) was the most stable reference gene for expression studies of key genes involved in betalain biosynthesis of pitaya. And the most stable reference gene combination for expression studies in pitaya was Actin(1) and EF1-α(1).

Conclusions

To the best of our knowledge, this study is the first report on systematically evaluating the expression stability of different potential reference genes for qRT-PCR in the Cactaceae family. Thirty-nine typical reference genes were selected to determine the most stable reference genes for qRT-PCR normalization in pitaya. Based on the melting curve and Ct values, Actin(1), EF1-α(1), GAPDH, UBC(1), UBC(2) and histone(1) genes were selected for further analyses in different tissues, temperature stresses and fruit developmental stages of pitayas. Actin(1) and EF1-α(1) were identified as the optimum internal control genes according to calculations made with geNorm, NormFinder and BestKeeper programs. Validation of suitable reference genes was carried out to profile the expression of Cyt P450-like1 gene during flesh coloration stages of Guanhuahong and Guanhuabai. Actin(1) was the best reference gene for qRT-PCR normalization. The present study provides the appropriate reference gene for normalization of reliable qRT-PCR data in different pitaya tissues, temperature stresses and fruit developmental stages which will be useful for the expression profiles of target genes in Hylocereus plant and related species.

Availability of data and materials

The data and materials supporting the conclusions of this study are included within the article.

Abbreviations

CAM:

crassulacean acid metabolism

cDNA:

complementary DNA

Cov:

covariance

Ct:

cycle threshold

CV:

coefficient of variance

DNase I:

deoxyribonuclease I

EF1-α:

eukaryotic elongation factor 1-alpha

eIF:

eukaryotic initiation factor

GAPDH:

glyceraldehyde-3-phosphate dehydrogenase

SD:

standard deviation

TATA:

TATA box binding protein-associated factor

TUA:

alpha-tubulin

TUB:

beta-tubulin

UBC:

ubiquitin-conjugating enzyme

UBQ:

ubiquitin

References

  1. Mackay IM. Real-time PCR in the microbiology laboratory. Clin Microbiol Infect. 2004;10:190–212.

    Article  CAS  Google Scholar 

  2. Ransbotyn V, Reusch TBH. Housekeeping gene selection for quantitative real-time PCR assays in the seagrass Zostera marina subjected to heat stress. Limnol Oceanogr Methods. 2006;4:367–73.

    Article  CAS  Google Scholar 

  3. Yoo WG, Kim TI, Li SY, Kwon OS, Cho PY, Kim TS, Kim K, Hong SJ. Reference genes for quantitative analysis on Clonorchis sinensis gene expression by real-time PCR. Parasitol Res. 2009;104:321–8.

    Article  Google Scholar 

  4. Reddy DS, Bhatnagar-Mathur P, Cindhuri KS, Sharma KK. Evaluation and validation of reference genes for normalization of quantitative real-time PCR based gene expression studies in peanut. PLoS ONE. 2013;8:e78555.

    Article  Google Scholar 

  5. Wu WK, Liu CQ, Zhou ZG, Lu S. The selection of reference genes in Chlamydomonas reinhardtii P.A. dangeard by real-time quantitative PCR. Plant Physiol Commun. 2009;45:667–72.

    CAS  Google Scholar 

  6. Vandesompele J, De Preter K, Pattyn F, Poppe B, Van Roy N, De Paepe A, Speleman F. Accurate normalization of real-time quantitative RT-PCR data by geometric averaging of multiple internal control genes. Genome Biol. 2002;3:1–11.

    Article  Google Scholar 

  7. Shin R, Schachtman DP. Hydrogen peroxide mediates plant root cell response to nutrient deprivation. Proc Natl Acad Sci. 2004;101:8827–32.

    Article  CAS  Google Scholar 

  8. Li L, Xu J, Xu ZH, Xue HW. Brassinosteroides stimulate plant tropisms through modulation of polar auxin transport in Brassica and Arabidopsis. Plant Cell. 2005;17:2738–53.

    Article  CAS  Google Scholar 

  9. Jeong YM, Mun JH, Lee I, Woo JC, Hong CB, Kim SG. Distinct roles of the first introns on the expression of Arabidopsis profilin gene family members. Plant Physiol. 2006;140:196–209.

    Article  CAS  Google Scholar 

  10. Sun ML, Wang YS, Yang DQ, Wei CL, Gao LP, Tao X, Shan Y, Luo Y. Reference genes for real-time fluorescence quantitative PCR in Camellia sinensis. Chin Bull Bot. 2010;45:579–87.

    CAS  Google Scholar 

  11. Su XJ, Fan BG, Yuan LC, Cui XN, Lu SF. Selection and validation of reference genes for quantitative RT-PCR analysis of gene expression in Populus trichocarpa. Chin Bull Bot. 2013;48:507–18.

    CAS  Google Scholar 

  12. Wei YD, Chen Y, Guo HP, Xie HA, Zhang JF, Wang ZH. Selection of reference genes for real-time quantitative RT-PCR in rice (Oryza sativa L. ssp. japonica) under nutrient deficiency. J Agric Biotechnol. 2013;21:1302–12.

    CAS  Google Scholar 

  13. Wang HB, Wang JJ, Jiang JF, Chen SM, Guan ZY, Liao Y, Chen FD. Reference genes for normalizing transcription in diploid and tetraploid Arabidopsis. Sci Rep. 2014;4:6781.

    Article  CAS  Google Scholar 

  14. Wang JX, Zhang LJ, Liao ZY, Zhang YG, Qiu QD, Sun P, Sun YH, Hu RY, Lu N, Li Y. The selection of reference genes for real-time quantitative PCR normalization in Black locust (Robinia pseudoacacia). Sci Silvae Sin. 2014;50:167–72.

    CAS  Google Scholar 

  15. Xiao XL, Ma JB, Wang JR, Wu XM, Li PB, Yao YN. Validation of suitable reference genes for gene expression analysis in the halophyte Salicornia europaea by real-time quantitative PCR. Front Plant Sci. 2015;5:788.

    Article  Google Scholar 

  16. Bustin SA, Benes V, Garson JA, Helleman J, Huggett J, Kubista M, Mueller R, Nolan T, Pfaffl MW, Shipley GL, et al. The MIQE guidelines: minimum information for publication of quantitative real-time PCR experiments. Clin Chem. 2009;55:611–22.

    Article  CAS  Google Scholar 

  17. Wang YJ, Dong L, Zhang C, Wang XQ. Reference gene selection for real-time quantitative PCR normalization in tree Peony (Paeonia suffruticosa Andr.). J Agric Biotechnol. 2012;20:521–8.

    CAS  Google Scholar 

  18. Andersen CL, Jensen JL, Ørntoft TF. Normalization of real-time quantitative reverse transcription-PCR data: a model-based variance estimation approach to identify genes suited for normalization, applied to bladder and colon cancer data sets. Cancer Res. 2004;64:5245–50.

    Article  CAS  Google Scholar 

  19. Pfaffl MW, Tichopad A, Prgomet C, Neuvians TP. Determination of stable housekeeping genes, differentially regulated target genes and sample integrity: BestKeeper—Excel-based tool using pair-wise correlations. Biotechnol Lett. 2004;26:509–15.

    Article  CAS  Google Scholar 

  20. Adnan L, Osman A, Hamid AA. Antioxidant activity of different extracts of red pitaya (Hylocereus polyrhizus) seed. Int J Food Prop. 2011;14:1171–81.

    Article  CAS  Google Scholar 

  21. Esquivel P, Stintzing FC, Carle R. Comparison of morphological and chemical fruit traits from different pitaya genotypes (Hylocereus sp.) grown in Costa Rica. J Appl Bot Food Qual. 2007;81:7–14.

    CAS  Google Scholar 

  22. Song H, Chu Q, Yan F, Yang Y, Han W, Zheng X. Red pitaya betacyanins protects from diet-induced obesity, liver steatosis and insulin resistance in association with modulation of gut microbiota in mice. J Gastroenterol Hepatol. 2016;31:1462–9.

    Article  CAS  Google Scholar 

  23. Hua QZ, Chen CJ, Chen Z, Chen PK, Ma YW, Wu JY, Zheng J, Hu GB, Zhao JT, Qin YH. Transcriptomic analysis reveals key genes related to betalain biosynthesis in pulp coloration of Hylocereus polyrhizus. Front Plant Sci. 2016;6:1179.

    Google Scholar 

  24. Wu JY, Peng G, Li CQ, Lu WJ, Wang ZH, Li JG. A new rapid and effective method for RNA isolation from litchi tissues of fruitlet and abscission zone. Acta Hortic Sin. 2011;38:1191–6.

    CAS  Google Scholar 

  25. Livak KJ, Schmittgen TD. Analysis of relative gene expression data using real-time quantitative PCR and the 2−ΔΔCT method. Methods. 2001;25:402–8.

    Article  CAS  Google Scholar 

  26. Hua QZ, Chen CB, Tel Zurb N, Wang HC, Wu JY, Chen JY, Zhang ZK, Zhao JT, Hu GB, Qin YH. Metabolomic characterization of pitaya fruit from three red-skinned cultivars with different pulp colors. Plant Physiol Biochem. 2018;126:117–25.

    Article  CAS  Google Scholar 

  27. Nicot N, Hausman JF, Hoffmann L, Evers D. Housekeeping gene selection for real-time RT-PCR normalization in potato during biotic and abiotic stress. J Exp Bot. 2005;56:2907–14.

    Article  CAS  Google Scholar 

  28. Udvardi MK, Czechowski T, Scheible WR. Eleven golden rules of quantitative RT-PCR. Plant Cell. 2008;20:1736–7.

    Article  CAS  Google Scholar 

  29. Wang HB, Chen SM, Jiang JF, Zhang F, Chen FD. Reference gene selection for cross-species and cross-ploidy level comparisons in Chrysanthemum spp. Sci Rep. 2015;5:8094.

    Article  CAS  Google Scholar 

  30. Lee PD, Sladek R, Greenwood CM, Hudson TJ. Control genes and variability: absence of ubiquitous reference transcripts in diverse mammalian expression studies. Genome Res. 2002;12:292–7.

    Article  Google Scholar 

  31. Huggett J, Dheda K, Bustin S, Zumla A. Real-time RT-PCR normalization; strategies and considerations. Genes Immun. 2005;6:279–84.

    Article  CAS  Google Scholar 

  32. Reid KE, Olsson N, Schlosser J, Peng F, Lund ST. An optimized grapevine RNA isolation procedure and statistical determination of reference genes for real-time RT-PCR during berry development. BMC Plant Biol. 2006;6:27.

    Article  Google Scholar 

  33. Mafra V, Kubo KS, Alves-Ferreira M, Ribeiro-Alves M, Stuart RM, Boava LP, Rodrigues CM, Machado MA. Reference genes for accurate transcript normalization in Citrus genotypes under different experimental conditions. PLoS ONE. 2012;7:e31263.

    Article  CAS  Google Scholar 

  34. Liang WX, Zou XX, Carballar-Lejarazú R, Wu LJ, Sun WH, Yuan XY, Wu SQ, Li PF, Ding H, Ni L, et al. Selection and evaluation of reference genes for qRT-PCR analysis in Euscaphis konishii Hayata based on transcriptome data. Plant Methods. 2018;14:42.

    Article  Google Scholar 

  35. Amorim LLB, Ferreira-Neto JRC, Bezerra-Neto JP, Pandolfi V, de Araujo FT, Matos MKD, Santos MG, Kido EA, Benko-Iseppon AM. Cowpea and abiotic stresses: identification of reference genes for transcriptional profiling by qPCR. Plant Methods. 2018;14:88.

    Article  Google Scholar 

  36. Petriccione M, Mastrobuoni F, Zampella L, Scortichini M. Reference gene selection for normalization of qRT-PCR gene expression data from Actinidia deliciosa leaves infected with Pseudomonas syringae pv. Actinidiae. Sci Rep. 2015;5:16961.

    Article  CAS  Google Scholar 

  37. Storch TT, Pegoraro C, Finatto T, Quecini V, Rombaldi CV, Girardi CL. Identification of a novel reference gene for apple transcriptional profiling under postharvest conditions. PLoS ONE. 2015;10:e0120599.

    Article  Google Scholar 

  38. Gandia-Herrero F, Garcia-Carmona F. Biosynthesis of betalains: yellow and violet plant pigments. Trends Plant Sci. 2013;18:334–43.

    Article  CAS  Google Scholar 

  39. De Loache WC, Russ ZN, Narcross L, Gonzales AM, Martin V, Dueber JE. An enzyme-coupled biosensor enables (S)-reticuline production in yeast from glucose. Nat Chem Biol. 2015;11:465.

    Article  Google Scholar 

  40. Polturak G, Breitel D, Grossman N, Sarrion-Perdigones A, Weithorn E, Pliner M, Orzaez D, Granell A, Rogachev I, Aharoni A. Elucidation of the first committed step in betalain biosynthesis enables the heterologous engineering of betalain pigments in plants. New Phytol. 2016;210:269–83.

    Article  CAS  Google Scholar 

  41. Sunnadeniya R, Bean A, Brown M, Akhavan N, Hatlestad G, Gonzalez A, Symonds VV, Lloyd A. Tyrosine hydroxylation in betalain pigment biosynthesis is performed by cytochrome p450 enzymes in beets (Beta vulgaris). PLoS ONE. 2016;11:e149417.

    Article  Google Scholar 

  42. Polturak G, Aharoni A. “la vie en rose’’: biosynthesis, sources, and applications of betalain pigments. Mol Plant. 2017;11:7–22.

    Article  Google Scholar 

Download references

Acknowledgements

The authors would also like to thank fellow members of the orchard of Dalingshan Forest Park for management of experimental materials.

Funding

This work was supported by the Key Areas of Science and Technology Planning Project of Guangdong Province (2018B020202011), the Key Science and Technology Planning Project of Guangzhou (201904020015), Science and Technology Program of Guangzhou (201704020003 and 2014Y2-00164), YangFan Innovative and Entepreneurial Research Team Project (2014YT02H013), and the Earmarked Fund for Guangdong Modern Agro-industry Technology Research System (2016LM1130), and the Science and Technology Planning Project of Guangdong Province (2014B020202010).

Author information

Authors and Affiliations

  1. State Key Laboratory for Conservation and Utilization of Subtropical Agro-bioresources/Guangdong Provincial Key Laboratory of Postharvest Science of Fruits and Vegetables/Key Laboratory of South China Horticultural Crop Biology and Germplasm Enhancement, Ministry of Agriculture, College of Horticulture, South China Agricultural University, Guangzhou, 510642, China

    Canbin Chen, Jingyu Wu, Qingzhu Hua, Fangfang Xie, Zhike Zhang, Jianye Chen, Rong Zhang, Guibing Hu, Jietang Zhao & Yonghua Qin

  2. French Associates Institute for Agriculture and Biotechnology of Drylands, The J. Blaustein Institutes for Desert Research, Ben-Gurion University of the Negev, 84990, Sede Boqer, Israel

    Noemi Tel-Zur

Authors
  1. Canbin Chen
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Jingyu Wu
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Qingzhu Hua
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Noemi Tel-Zur
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Fangfang Xie
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Zhike Zhang
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Jianye Chen
    View author publications

    You can also search for this author in PubMed Google Scholar

  8. Rong Zhang
    View author publications

    You can also search for this author in PubMed Google Scholar

  9. Guibing Hu
    View author publications

    You can also search for this author in PubMed Google Scholar

  10. Jietang Zhao
    View author publications

    You can also search for this author in PubMed Google Scholar

  11. Yonghua Qin
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

C.C., J.W. and Y.Q. conceived and designed the experiments. C.C. and J.W. performed the experiments. C.C., J.W. and Q.H. analyzed the data. N.T., F. X., Z. Z., J.C., R.Z., G.H. and J.Z. contributed reagents/materials/analysis tools. C.C., J.W., N.T. and Y.Q. wrote and revised the paper. All authors read and approved the final manuscript.

Corresponding author

Correspondence to Yonghua Qin.

Ethics declarations

Ethics approval and consent to participate

Not applicable.

Consent for publication

All authors have consented to this publication.

Competing interests

The authors declare that they have no competing interests.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Additional files

Additional file 1: Fig. S1.

Different fruit developmental stages of Guanhuabai (A) and Guanhuahong (B) pitayas. A1 and B1, 13 days; A2 and B2, 16 days; A3 and B3, 19 days; A4 and B4, 23 days; A5 and B5, 25 days; A6 and B6, 27 days; A7 and B7, 29 days. Bar = 4.0 cm.

Additional file 2: Table S1.

cDNA sequences of thirty-nine reference genes.

Additional file 3: Table S2.

Sequence analyses of thirty-nine reference genes.

Additional file 4: Fig. S2.

Melt curve analyses of thirty-nine reference genes from eight different tissues (including roots, stems, flowers, and fruits) of Hylocereus.

Additional file 5: Fig. S3.

Boxplot analyses of thirty-nine reference genes from eight different tissues (including roots, stems, flowers and fruits) of Hylocereus. The whisker caps show the distribution of the highest and lowest Ct values. The boxes indicate the first and third quartile, while the middle line marks the median.

Additional file 6: Fig. S4.

Ct value of six candidate reference genes in different temperature stresses of pitaya cutting plantlets.

Additional file 7: Table S3.

The coefficient of variance (CV) of the six candidate reference genes using BestKeeper algorithm.

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Chen, C., Wu, J., Hua, Q. et al. Identification of reliable reference genes for quantitative real-time PCR normalization in pitaya. Plant Methods 15, 70 (2019). https://doi.org/10.1186/s13007-019-0455-3

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/s13007-019-0455-3

Keywords

Plant Methods

ISSN: 1746-4811