Plant genome editing made easy: targeted mutagenesis in model and crop plants using the CRISPR/Cas system
Plant Methods volume 9, Article number: 39 (2013)
Targeted genome engineering (also known as genome editing) has emerged as an alternative to classical plant breeding and transgenic (GMO) methods to improve crop plants. Until recently, available tools for introducing site-specific double strand DNA breaks were restricted to zinc finger nucleases (ZFNs) and TAL effector nucleases (TALENs). However, these technologies have not been widely adopted by the plant research community due to complicated design and laborious assembly of specific DNA binding proteins for each target gene. Recently, an easier method has emerged based on the bacterial type II CRISPR (clustered regularly interspaced short palindromic repeats)/Cas (CRISPR-associated) immune system. The CRISPR/Cas system allows targeted cleavage of genomic DNA guided by a customizable small noncoding RNA, resulting in gene modifications by both non-homologous end joining (NHEJ) and homology-directed repair (HDR) mechanisms. In this review we summarize and discuss recent applications of the CRISPR/Cas technology in plants.
Targeted genome engineering has emerged as an alternative to classical plant breeding and transgenic (GMO) methods to improve crop plants and ensure sustainable food production. However, until recently the available methods have proven cumbersome. Both zinc finger nucleases (ZFNs) and TAL effector nucleases (TALENs) can be used to mutagenize genomes at specific loci, but these systems require two different DNA binding proteins flanking a sequence of interest, each with a C-terminal FokI nuclease module. As a result these methods have not been widely adopted by the plant research community. Earlier this year, a new method based on the bacterial CRISPR (clustered regularly interspaced short palindromic repeats)/Cas (CRISPR-associated) type II prokaryotic adaptive immune system  has emerged as an alternative method for genome engineering. The ability to reprogram CRISPR/Cas endonuclease specificity using customizable small noncoding RNAs has set the stage for novel genome editing applications [2–8]. The system is based on the Cas9 nuclease and an engineered single guide RNA (sgRNA) that specifies a targeted nucleic acid sequence. Given that only a single RNA is required to generate target specificity, the CRISPR/Cas system promises to be more easily applicable to genome engineering than ZFNs and TALENs.
Recently, eight reports describing the first applications of the Cas9/sgRNA system to plants have been published [9–16]. In this review, we summarise the methods and findings described in these publications and provide an outlook for the application of the CRISPR/Cas system as a genome engineering tool in plants.
Plant genome editing using the CRISPR/Cas system
The application of the bacterial CRISPR/Cas system to plants is very recent. In the August 2013 issue of Nature Biotechnology three short reports described the first applications of the Cas9/sgRNA system to plant genome engineering [9–11]. Shortly after, five more reports followed [12–16]. The papers mainly focused on testing the CRISPR/Cas technology using transient expression assays (Table 1 and Figure 1), such as protoplast transformation and in planta expression using Agrobacterium tumefaciens transient expression (agroinfiltration) . Mutations introduced via both nonhomologous end joining (NHEJ) and homology-directed repair (HDR) pathways have been reported. Five of the studies generated whole plants that carry mutations at the targeted loci (Table 1).
Cas9 nuclease for plant genome editing
Cas9, a hallmark protein of the type II CRISPR-Cas system, is a large monomeric DNA nuclease guided to a DNA target sequence adjacent to the PAM (protospacer adjacent motif) sequence motif by a complex of two noncoding RNAs: CRIPSR RNA (crRNA) and trans-activating crRNA (tracrRNA) [1, 2, 18]. In August 2012, Jinek et al. showed that a synthetic RNA chimera (single guide RNA, or sgRNA) created by fusing crRNA with tracrRNA is functional to a similar level as the crRNA and tracrRNA complex. As a result, the number of components in the CRISPR/Cas system was brought down to two, Cas9 and sgRNA .
The Cas9 protein contains two nuclease domains homologous to RuvC and HNH nucleases. The HNH nuclease domain cleaves the complementary DNA strand whereas the RuvC-like domain cleaves the non-complementary strand and, as a result, a blunt cut is introduced in the target DNA . By now, many reports have successfully demonstrated that heterologous expression of Cas9 together with an sgRNA can introduce site-specific double strand breaks (DSBs) into genomic DNA of live cells from various organisms . For applications in eukaryotic organisms, codon optimized versions of Cas9, which is originally from the bacterium Streptococcus pyogenes, have been used. Four of the studies on the application of the CRISPR/Cas technology in plants used a plant codon-optimized version of Cas9 [10, 11, 15, 16] while the other four [9, 12–14] used the previously described human codon-optimized version (Table 1 and Figure 2). In addition to the codon optimised versions of Cas9, Jiang et al. tested the wild type S. pyogenes Cas9 and found it was working in rice protoplasts against the OsSWEET14 target .
As in the case of human cells [4, 5], the Cas9 protein was expressed in plants as a fusion to a nuclear localization signal (NLS) to ensure delivery into nuclei. Cas9 was fused to either a single NLS or was flanked by two NLSs, and, as in human cells, both versions appear to be functional (Table 1 and Figure 2). In addition, six studies used a Cas9 version with a tag (FLAG or GFP), while two studies used a non-tagged Cas9 (Figure 2), suggesting that tagging the protein does not compromise the endonuclease activity in planta. Four different promoters were used to drive Cas9 expression with the Cauliflower mosaic virus 35S promoter being the most commonly used (Figure 2).
In summary, all tested versions of Cas9 seem to work in plants and very high rates of mutant transgenic plants, generated using the CRISPR/Cas system, have been reported (up to 89% for Arabidopsis and up to 92% for rice) with biallelic mutation being recovered in the case of both plant species (Table 1).
Although the discussed studies provide an insight into functional Cas9 configurations, further studies and side-by-side experiments are required to investigate whether some promoters and Cas9 combinations are more effective than others in plants.
sgRNAs for plant genome editing
The single guide RNA (sgRNA) is the second component of the CRISPR/Cas system that forms a complex with the Cas9 nuclease. As mentioned above, the sgRNA is a synthetic RNA chimera created by fusing crRNA with tracrRNA . The sgRNA guide sequence located at its 5′ end confers DNA target specificity (Figure 3). Therefore, by modifying the guide sequence, it is possible to create sgRNAs with different target specificities. The canonical length of the guide sequence is 20 bp . Consequently, a DNA target is also 20 bp followed by a PAM sequence that follows the consensus NGG (Figure 3). Interestingly, DNA targets and sgRNA guide sequences that differ from the canonical 20 bp length have been reported in some plant studies [10, 12–15], while in the mammalian field targets of the consensus (N)20NGG are normally used. Therefore, DNA targets validated in plants deviate from the strict (N)20NGG and to date follow the consensus (N)19-22NGG. The extent to which target sequences that deviate further from this consensus can affect the recognition by the Cas9/sgRNA system remains to be determined.
In plants, sgRNAs have been expressed using plant RNA polymerase III promoters, such as U6 and U3 (Table 1 and Figure 3). These promoters have a defined transcription start nucleotide, which is “G” or “A”, in the case of U6 or U3 promoters, respectively (Figure 3). Therefore, the guide sequences in the sgRNAs, used to target plant genomic loci, follow the consensus G(N)19–22 for the U6 promoter and A(N)19–22 for the U3 promoter, where the first G or A may or may not pair up with the target DNA sequence [9–16]. On the other hand, in mammalian systems, sgRNA guide sequences normally follow the consensus G(N)19–20 where the first G may or may not pair up with the target [20, 21].
CRISPR/Cas genome editing assays in plants
In plants the CRISPR/Cas9 system has been implemented using transient expression systems, therefore enabling rapid execution and optimization of the method. Widely used transient assays in plant research are (i) protoplast transformation and (ii) leaf tissue transformation using the agroinfiltration method. Both methods have been used for Cas9 and sgRNA (Figure 1). The advantage of the protoplast strategy is the possibility to achieve high levels of gene co-expression even from separate plasmids. However, isolation of protoplasts from plant tissue requires enzymatic digestion and removal of the cell wall. The procedure can be time consuming, and protoplast cultures are fragile and prone to contamination. An alternative is the agroinfiltration assay, which is performed on intact plants, and relatively less time consuming compared to protoplasts. This system is based on infiltration of A. tumefaciens strains carrying a binary plasmid that contains the candidate genes to be expressed . Efficiency of gene co-expression by agroinfiltration appears to be lower than in protoplasts, and combining multiple genes of interest in one vector is preferable. However, not all plant species are amenable to transformation by these methods and options can be limited depending on the plant species of interest.
To readily detect induced mutations generated by the CRISPR/Cas method, one approach is to target a restriction enzyme site and use the restriction enzyme site loss assay described below (Figure 1). Since the Cas9 nuclease introduces a blunt cut in the DNA predominantly 3 bp away from the PAM (Figure 3), it is advantageous to identify a DNA target with an overlapping restriction site proximal to the PAM motif. In this case, the repair of a DSB via the error-prone NHEJ pathway will result in mutations that will disrupt the restriction site. Therefore, mutations can be detected by amplifying the genomic DNA across the target and digesting resulting amplicons with the restriction enzyme (Figure 1). This assay can be more sensitive when the PCR-amplification is performed on genomic DNA template pre-digested with the restriction enzyme [9, 16].
An alternative assay is the Surveyor assay . PCR-amplified DNA from the Cas9/sgRNA treated sample is first denatured and then allowed to anneal before being subject to CELI or T7 endonuclease I that cleave hetero-duplexes formed by the WT and the mutated DNA [13, 14]. It is worth considering that the Surveyor assay is less sensitive than the restriction enzyme site loss assay and requires a higher rate of mutagenesis to be successfully applied. However, it can in principle be applied to any target sequence.
The efficiency of gene mutagenesis can be improved by creating a large deletion. This can be achieved by simultaneously introducing two DSBs guided by two sgRNAs targeting the same locus. For example, a large deletion was introduced by targeting two juxtaposed target sequences on the chromosome in Arabidopsis [11, 13]. A similar approach can be implemented in N. benthamiana using the agroinfiltration assay to generate targeted deletions (Figure 4; Materials and Methods). Co-expression of Cas9 with sgRNAs, targeting two adjacent sequences 50 bp apart, resulted in a large deletion in the NbPDS gene. The AFLP (amplified fragment length polymorphism) assay was used to detect deletions. DNA from the lower PCR band in lanes 2 and 4 (Figure 4B) was cloned and sequenced. Sequencing 15 individual clones revealed presence of 3 types of deletions (Figure 4C). As illustrated by the Figure 4B, the efficiency of the mutagenesis was higher in the case of Cas9 and both sgRNA1 and 2 being expressed from the same plasmid. Transgenic N. benthamiana plants can be easily regenerated out of the agroinfiltrated tissue  and therefore it should be possible to generate plants carrying the specified deletions.
Homology-directed repair (HDR) using CRISPR/Cas system in plants
The DSB introduced by Cas9 nuclease guided by an sgRNA can be repaired via either the cell’s NHEJ or HDR mechanisms. NHEJ can be harnessed to generate single and multiple gene knock-outs as well as large chromosomal deletions following cuts generated by CRISPR/Cas. HDR, on the other hand, enables targeted gene insertions (e.g. introducing a green fluorescent protein GFP tag into a genomic locus) or gene replacements (e.g. introducing a SNP into a gene of interest) . HDR-dependent genome editing using the CRISPR system has been achieved in N. benthamiana and rice . The donor DNA, which is used as a repair template, was delivered into protoplasts as a single stranded oligo  or as a double stranded DNA fragment . The next challenge would be to regenerate whole plants from protoplasts and so far this is only possible for some plant species (e.g. N. benthamiana and Arabidopsis).
HDR using CRISPR/Cas system has not yet been achieved in plants using A. tumefaciens delivery. In principle, the DNA repair template can be delivered together with the Cas9 and sgRNA in a T-DNA carrying all three components as reported for the I-SceI meganuclease . For plant species that are not amenable to transformation by A. tumefaciens and cannot be regenerated out of protoplasts, the Cas9/sgRNA and donor DNA can be delivered into plant cells by callus bombardment as described for cotton in D’Halluin et al. .
HDR-mediated genome editing can be problematic due to intrinsically low efficiency of homologous recombination (HR) as in the case of Arabidopsis . The NHEJ DNA repair pathway is antagonistic to the HDR pathway. Therefore, HDR efficiency can be increased using mutants compromised in the NHEJ DNA repair mechanism (e.g. ku70 and lig4). In Arabidopsis, an increase of 5–16 fold in HDR-mediated gene targeting has been reported for the ku70 mutant and 3–4 fold for the lig4 mutant . Once the desired gene-targeting event is produced, the ku70 or lig4 mutations can be crossed out of the mutant plants.
Off-target mutations and plant genome editing
Target specificity is an important issue for all genome editing technologies, including CRISPR/Cas. Recently, a number of reports have systematically examined specificity of the CRISPR/Cas system in human cells as well as in vitro[26–30]. The main conclusion is that the 3′ end of the guide sequence within the sgRNA predominantly confers target specificity of the CRISPR/Cas system. This is consistent with earlier reports [2, 5, 8]. Mismatches between the DNA target and the guide sequence of the sgRNA located within the last 8–10 bp of the 20 bp target sequence often abolish the target recognition by Cas9, while mismatches towards the 5′ end of the target are better tolerated. Presence of the PAM motif (NGG) right after the 20 bp target is essential, although Hsu et al. reported that a variant of the PAM with a noncanonical NAG sequence retains some activity . Importantly, the number and position of tolerable mismatches between the DNA target and the guide sequence is target-dependent and users should be careful not to generalize the reported rates [26, 29].
How prone is the CRISPR system to off-target activity when applied in plants? Off-targets were addressed in four reports [9–11, 14]. Two of them detected experimental evidence of off-target activity in rice [10, 14]. However, Nekrasov et al. did not detect off-target activity in N. benthamiana for 18 off-sites with sequence similarity to the target . Overall, the number of tested off-sites in all studies was relatively small and general conclusions would be premature. A comprehensive study based on whole genome sequencing of mutant plants is required to fully address this issue in planta.
Off-target mutations by the CRISPR system can be minimised by selecting target sequences that have reduced numbers of off-targets in the genome. Examples of algorithms for selecting specific targets have been reported for Arabidopsis and rice [11, 14, 15]. In any case, off-target mutations are less problematic in plants compared to animals, because they can easily be crossed out.
The CRISPR/Cas technology has enormous potential as a straightforward genome-editing tool for basic and applied plant research. Considering the number of reports that have already been published on plant applications, the method appears to be easily applicable and robust. The major advantage of the CRISPR/Cas technology over ZFNs and TALENs is that the method does not require elaborate design and time-consuming assembly of individual DNA-binding proteins. In contrast, the CRISPR/Cas system is versatile and only requires a single Cas9 nuclease that can be programmed by engineering the sgRNA.
Until recently, the possibility of recovering knockout lines by conventional reverse genetic approaches (T-DNA, TILLING) for a specific gene has been dictated by chance. The shorter the gene, the lower the probability to hit it with a T-DNA insertion or a mutation. Routine targeted mutagenesis opens up a new dimension in plant biology and should help to generate mutants in previously difficult to access genes, as well as simultaneously mutate multiple loci and generate large deletions [11, 13]. The likelihood of targeting a specific genomic locus is probably affected by various factors (e.g. chromatin context) but Cas9 does not seem to be affected by DNA methylation, at least in human cells .
We foresee the CRISPR technology to become a routine method in plants for making targeted single and multiple gene knock-outs, introducing SNPs into a gene of interest, expressing proteins tagged with affinity or fluorescent tags at their native loci in the genome and much more. However, some questions remain to be addressed as the technology has only been implemented for a few months. One of the outstanding issues is whether genetic changes induced by Cas9/sgRNA can be inherited by the plant germline and transferred to subsequent generations. Genotyping the progeny of plants carrying Cas9/sgRNA induced mutations will answer this question. The relatively high off-target rate of the CRISPR system could be an issue as well. However, off-target effect can be minimised by making an informed decision about the choice of target sequence within a gene according to the algorithms described [11, 14, 15]. The plant field will soon benefit from an online tool analogous to http://crispr.mit.edu/ for designing CRISPR targets with a minimum off-target effect in various plant species. As mentioned earlier, the off-target mutations in plants are less problematic compared to human or animals as they can be easily bred out.
Like ZFNs and TALENs, the CRISPR technology has become one of the new plant breeding techniques (NPBTs). NPBTs are currently debated by advisory and regulatory authorities in Europe and worldwide in relation to the GMO legislation [31–34]. These techniques make possible introducing plant genome modifications, which are indistinguishable from those introduced by conventional breeding and chemical or physical mutagenesis. As a result, crop varieties produced using the above mentioned technologies may be classified as non-GM. Excluding such crop varieties from the scope of the GMO legislation, especially in Europe, would have an enormous positive impact on the development of the plant biotechnology and breeding sector.
Materials and methods
In the case of the lane 2 (Figure 4B), pK7WGF2::Cas9 and pICH86966::AtU6p::sgRNA_PDS (sgRNA1)  were co-expressed with pICH86966::AtU6p::sgRNA2 in N. benthamiana using the standard agroinfiltration protocol. pICH86966::AtU6p::sgRNA2 was created in the same way as pICH86966::AtU6p::sgRNA_PDS (sgRNA1) except that the oligos used to construct the sgRNA2 were PDS_gRNA2_BsaIf and gRNA_AGCG_BsaIr (Table 2).
In the case of the lane 4 (Figure 4B), Cas9 and both sgRNA1 and 2 were expressed in N. benthamiana from the single construct pAGM4723::AtU6p::sgRNA2-2x35S-5′UTR::Cas9::NOST-AtU6p::sgRNA1 as described above for the lane 2. The construct was assembled using the Golden Gate (GG) cloning method  as following. sgRNA1 was PCR-amplified with primers PDS_gRNA1_BsaIf and gRNA_AGCG_BsaIr, and sgRNA2 – with primers PDS_gRNA2_BsaIf and gRNA_AGCG_BsaIr using the plasmid gRNA_GFP_T1  as a template. Both sgRNA1 and sgRNA2 PCR products were cut-ligated with the AtU6p level 0 module  into pICH47751 and pICH47732 level 1 vectors  respectively using BsaI.
In order to use the human codon optimised Cas9  in the GG system, all BsaI and BbsI sites had to be removed from its sequence, while preserving the amino acid composition of the protein, in a process called “domestication”. Fragments of the Cas9 coding sequence were amplified with six pairs of primers: Cas9_1f/Cas9_1r, Cas9_2f/Cas9_2r, Cas9_3f/Cas9_3r, Cas9_4f/Cas9_4r, Cas9_5f/Cas9_5r and Cas9_6f/Cas9_6-1r using the clone described in Mali et al. as a template. The resulting PCR fragments were cloned into the pCR-Blunt II-TOPO vector (Life Technologies). All six cloned fragments of Cas9 were then cut-ligated into a level 0 vector  using BbsI. The resulting Cas9 level 0 module was combined with 2x35S-5′UTR (pICH51288) and NOST (pICH41421) level 0 modules (provided by S. Marillonnet) and cut-ligated into the pICH47742 level 1 vector  using BsaI.
pICH47732::AtU6p::sgRNA2, pICH47742::2x35S-5′UTR::Cas9::NOST and pICH47751::AtU6p::sgRNA1 level 1 constructs plus pELE-3 linker  were cut-ligated into the pAGM4723 level 2 vector (provided by S. Marillonnet) using BbsI. The resulting level 2 construct pAGM4723::AtU6p::sgRNA2-2x35S-5′UTR::Cas9::NOST-AtU6p::sgRNA1 was transformed into the AGL1 strain of A. tumifaciens.
Transient gene expression in N. benthamiana
Transient expression was performed using the AGL1 strain of A. tumefaciens as described in Bos et al. .
Detection of Cas9-induced deletions in plant genomic DNA
Cas9 and sgRNAs were transiently co-expressed in the N. benthamiana leaf tissue. The tissue was harvested at 2 days post infiltration and the genomic DNA extracted using the DNeasy Plant Mini kit (Qiagen). 50 ng of DNA was added in a PCR reaction and amplified with PDS_MlyIF and PDSseqr5 primers using the Phusion DNA polymerase (New England Biolabs). PCR products were run on a 3% agarose gel. The DNA from bottom bands in lanes 2 and 4 (Figure 4) was extracted and cloned into pCR-Blunt II-TOPO vector (Life Technologies). 15 individual clones were sequenced using standard M13 forward and M13 reverse primers.
Sorek R, Lawrence CM, Wiedenheft B: CRISPR-mediated adaptive immune systems in bacteria and archaea. Annu Rev Biochem 2013, 82: 237-266. 10.1146/annurev-biochem-072911-172315
Jinek M, Chylinski K, Fonfara I, Hauer M, Doudna JA, Charpentier E: A programmable dual-RNA-guided DNA endonuclease in adaptive bacterial immunity. Science 2012, 337: 816-821. 10.1126/science.1225829
Jinek M, East A, Cheng A, Lin S, Ma E, Doudna J: RNA-programmed genome editing in human cells. Elife 2013, 2: e00471. 10.7554/eLife.00471
Mali P, Yang L, Esvelt KM, Aach J, Guell M, DiCarlo JE, Norville JE, Church GM: RNA-guided human genome engineering via Cas9. Science 2013, 339: 823-826. 10.1126/science.1232033
Cong L, Ran FA, Cox D, Lin S, Barretto R, Habib N, Hsu PD, Wu X, Jiang W, Marraffini LA, Zhang F: Multiplex genome engineering using CRISPR/Cas systems. Science 2013, 339: 819-823. 10.1126/science.1231143
Cho SW, Kim S, Kim JM, Kim JS: Targeted genome engineering in human cells with the Cas9 RNA-guided endonuclease. Nat Biotechnol 2013, 31: 230-232. 10.1038/nbt.2507
Hwang WY, Fu Y, Reyon D, Maeder ML, Tsai SQ, Sander JD, Peterson RT, Yeh JR, Joung JK: Efficient genome editing in zebrafish using a CRISPR-Cas system. Nat Biotechnol 2013, 31: 227-229. 10.1038/nbt.2501
Jiang W, Bikard D, Cox D, Zhang F, Marraffini LA: RNA-guided editing of bacterial genomes using CRISPR-Cas systems. Nat Biotechnol 2013, 31: 233-239. 10.1038/nbt.2508
Nekrasov V, Staskawicz B, Weigel D, Jones JD, Kamoun S: Targeted mutagenesis in the model plant Nicotiana benthamiana using Cas9 RNA-guided endonuclease. Nat Biotechnol 2013, 31: 691-693. 10.1038/nbt.2655
Shan Q, Wang Y, Li J, Zhang Y, Chen K, Liang Z, Zhang K, Liu J, Xi JJ, Qiu JL, Gao C: Targeted genome modification of crop plants using a CRISPR-Cas system. Nat Biotechnol 2013, 31: 686-688. 10.1038/nbt.2650
Li JF, Norville JE, Aach J, McCormack M, Zhang D, Bush J, Church GM, Sheen J: Multiplex and homologous recombination-mediated genome editing in Arabidopsis and Nicotiana benthamiana using guide RNA and Cas9. Nat Biotechnol 2013, 31: 688-691. 10.1038/nbt.2654
Feng Z, Zhang B, Ding W, Liu X, Yang DL, Wei P, Cao F, Zhu S, Zhang F, Mao Y, Zhu JK: Efficient genome editing in plants using a CRISPR/Cas system. Cell Res 2013, 23: 1229-1232. 10.1038/cr.2013.114
Mao Y, Zhang H, Xu N, Zhang B, Gao F, Zhu JK: Application of the CRISPR-Cas system for efficient genome engineering in plants. Mol Plant doi:10.1093/mp/sst121 (August 20, 2013)
Xie K, Yang Y: RNA-guided genome editing in plants using a CRISPR-Cas system. Mol Plant doi:10.1093/mp/sst119 (August 17, 2013)
Miao J, Guo D, Zhang J, Huang Q, Qin G, Zhang X, Wan J, Gu H, Qu LJ: Targeted mutagenesis in rice using CRISPR-Cas system. Cell Res 2013, 23: 1233-1236. 10.1038/cr.2013.123
Jiang W, Zhou H, Bi H, Fromm M, Yang B, Weeks DP: Demonstration of CRISPR/Cas9/sgRNA-mediated targeted gene modification in Arabidopsis, tobacco, sorghum and rice. Nucleic Acids Res doi:10.1093/nar/gkt780 (September 2, 2013)
Van der Hoorn RA, Laurent F, Roth R, De Wit PJ: Agroinfiltration is a versatile tool that facilitates comparative analyses of Avr9/Cf-9-induced and Avr4/Cf-4-induced necrosis. Mol Plant Microbe Interact 2000, 13: 439-446. 10.1094/MPMI.2000.13.4.439
Deltcheva E, Chylinski K, Sharma CM, Gonzales K, Chao Y, Pirzada ZA, Eckert MR, Vogel J, Charpentier E: CRISPR RNA maturation by trans-encoded small RNA and host factor RNase III. Nature 2011, 471: 602-607. 10.1038/nature09886
Mussolino C, Cathomen T: RNA guides genome engineering. Nat Biotechnol 2013, 31: 208-209. 10.1038/nbt.2527
Yang H, Wang H, Shivalila CS, Cheng AW, Shi L, Jaenisch R: One-step generation of mice carrying reporter and conditional alleles by CRISPR/Cas-mediated genome engineering. Cell 2013, 154: 1370-1379. 10.1016/j.cell.2013.08.022
Wang HY, Yang H, Shivalila CS, Dawlaty MM, Cheng AW, Zhang F, Jaenisch R: One-step generation of mice carrying mutations in multiple genes by CRISPR/Cas-mediated genome engineering. Cell 2013, 153: 910-918. 10.1016/j.cell.2013.04.025
Voytas DF: Plant genome engineering with sequence-specific nucleases. Annu Rev Plant Biol 2013, 64: 327-350. 10.1146/annurev-arplant-042811-105552
Fauser F, Roth N, Pacher M, Ilg G, Sanchez-Fernandez R, Biesgen C, Puchta H: In planta gene targeting. Proc Natl Acad Sci USA 2012, 109: 7535-7540. 10.1073/pnas.1202191109
D’Halluin K, Vanderstraeten C, Van Hulle J, Rosolowska J, Van Den Brande I, Pennewaert A, D’Hont K, Bossut M, Jantz D, Ruiter R, Broadhvest J: Targeted molecular trait stacking in cotton through targeted double-strand break induction. Plant Biotechnol J 2013, 11: 933-941. 10.1111/pbi.12085
Qi Y, Zhang Y, Zhang F, Baller JA, Cleland SC, Ryu Y, Starker CG, Voytas DF: Increasing frequencies of site-specific mutagenesis and gene targeting in Arabidopsis by manipulating DNA repair pathways. Genome Res 2013, 23: 547-554. 10.1101/gr.145557.112
Fu Y, Foden JA, Khayter C, Maeder ML, Reyon D, Joung JK, Sander JD: High-frequency off-target mutagenesis induced by CRISPR-Cas nucleases in human cells. Nat Biotechnol 2013, 31: 822-826. 10.1038/nbt.2623
Pattanayak V, Lin S, Guilinger JP, Ma E, Doudna JA, Liu DR: High-throughput profiling of off-target DNA cleavage reveals RNA-programmed Cas9 nuclease specificity. Nat Biotechnol 2013, 31: 839-843. 10.1038/nbt.2673
Mali P, Aach J, Stranges PB, Esvelt KM, Moosburner M, Kosuri S, Yang L, Church GM: CAS9 transcriptional activators for target specificity screening and paired nickases for cooperative genome engineering. Nat Biotechnol 2013, 31: 833-838. 10.1038/nbt.2675
Hsu PD, Scott DA, Weinstein JA, Ran FA, Konermann S, Agarwala V, Li Y, Fine EJ, Wu X, Shalem O, et al.: DNA targeting specificity of RNA-guided Cas9 nucleases. Nat Biotechnol 2013, 31: 827-832. 10.1038/nbt.2647
Carroll D: Staying on target with CRISPR-Cas. Nat Biotechnol 2013, 31: 807-809. 10.1038/nbt.2684
Lusser M, Davies HV: Comparative regulatory approaches for groups of new plant breeding techniques. N Biotechnol 2013, 30: 437-446. 10.1016/j.nbt.2013.02.004
Lusser M, Parisi C, Plan D, Rodriguez-Cerezo E: Deployment of new biotechnologies in plant breeding. Nat Biotechnol 2012, 30: 231-239. 10.1038/nbt.2142
Pauwels K, Podevin N, Breyer D, Carroll D, Herman P: Engineering nucleases for gene targeting: safety and regulatory considerations. N Biotechnol doi:10.1016/j.nbt.2013.07.001 (July 12, 2013)
Kuzma J, Kokotovich A: Renegotiating GM crop regulation. Targeted gene-modification technology raises new issues for the oversight of genetically modified crops. EMBO Rep 2011, 12: 883-888. 10.1038/embor.2011.160
Weber E, Engler C, Gruetzner R, Werner S, Marillonnet S: A modular cloning system for standardized assembly of multigene constructs. PLoS One 2011, 6: e16765. 10.1371/journal.pone.0016765
Bos JI, Kanneganti TD, Young C, Cakir C, Huitema E, Win J, Armstrong MR, Birch PR, Kamoun S: The C-terminal half of Phytophthora infestans RXLR effector AVR3a is sufficient to trigger R3a-mediated hypersensitivity and suppress INF1-induced cell death in Nicotiana benthamiana. Plant J 2006, 48: 165-176. 10.1111/j.1365-313X.2006.02866.x
We thank Jonathan D. G. Jones for help with designing the Cas9 domestication strategy, Sylvestre Marillonnet and Icon Genetics, Halle, Germany for providing plasmid vectors, and the LFCats for discussion. This work was supported by the Gatsby Charitable Foundation, the European Research Council (ERC), and the Biotechnology and Biological Sciences Research Council (BBSRC).
The authors declared that they have no competing interests.
SK proposed the idea of the manuscript and wrote the outline. VN performed experiments. KB, ACG, SK and VN wrote the manuscript. All authors read and approved the final manuscript.
Khaoula Belhaj, Angela Chaparro-Garcia contributed equally to this work.
About this article
Cite this article
Belhaj, K., Chaparro-Garcia, A., Kamoun, S. et al. Plant genome editing made easy: targeted mutagenesis in model and crop plants using the CRISPR/Cas system. Plant Methods 9, 39 (2013). https://doi.org/10.1186/1746-4811-9-39
- Genome editing
- Genome engineering
- Targeted mutagenesis