Skip to main content
Figure 4 | Plant Methods

Figure 4

From: Simulation of future global warming scenarios in rice paddies with an open-field warming facility

Figure 4

Description of fittings for modified infrared heater array (Exp-II and III) (A, B, and C) Different views of steel angle attached on a coupling. Vertical pipe was inserted in coupling and was tightened with two screws on the coupling. Horizontal pipes were tightened with the help of a flat steel plate, nut and bolt. (D). Overall view of triangular pipe system to deploy the infrared heaters. (E) T shaped hanger to carry cable above ground. (F) distribution of cables above a FATE array.

Back to article page